When you upgrade your Windows, your printer information stored in HP Printer Assistant is lost. Due to this, you need to connect your HP printer once again to printer assistance. If you are also facing the same issue, then follow the steps below to reconnect your printer to the HP printer assistance.
Open the tool and click on Connect a New Printer option.
Next, you need to select your printer connection type.
Continue with the instructions on your screen to finish the printer setup.
In case, the connection fails, click on Retry and continue with the next step.
Switch off your HP printer as well as restart your computer.
Switch your HP printer on again and open HP Printer Assistance on your PC.
Try setting up your printer on HP Printer assistance again now.
HP Wireless Printer Setup
Connecting a printer over a USB cable is pretty easy. But connecting a wireless printer can become very challenging quite often. Follow the HP wireless printer setup process to install it in no time.
1. Take the printer out of the box and remove all tapes from it before starting.
2. Plug in the power cord, turn on the printer and install the print cartridges. Allow your printer to complete its startup routine, which includes printing of an alignment page (if applicable).
3. Go to the manufacturer's website and download drivers for your printer model.
4. Install the drivers and follow the instructions during hp wireless printer setup process.
5. In the meantime, go to printer's control panel and use wireless printer setup wizard.
6. Identify your wifi network and connect the printer to it using its correct credential.
7. Complete the wireless printer setup process by connecting to your printer model as it would appear during installation.
<a href="https://mchelperprintersupport.com/hp-wireless-printer-setup/">hp wireless printer setup</a>